AMF/ATS/Sync Panels

AMF/ATS/Synchronizing Panels

synchronization-panel 1

This system consists of an alternator standard control panel with MCM (Micro processor Control unit) and a change over system housed in separate wall mounted or floor standing panel.

Automatic transfer switches are used to automatically change over from the main electrical supply to stand-by generators or generate on failure of the main supply.

When the main supply is restored, the system automatically changes back and stops the generator. The stand-by generator will eventually be shut down after a short cooling down period.

These panels are provided with mechanically or electrically interlocked pole contactors or MCCB.


♦ Operated both automatically and manually.
♦ Employ a Breaker closing time delay installed in order to avoid current and voltage surges.
♦ Employ automated sensing for:
♦ Under voltage
♦ Phase failure
♦ Phase sequence
♦ Instilled with Generator start/stop commands
♦ And Indicate:
♦ Incoming voltage
♦ Engine running/faulty conditions
♦ MCCB On/Trip conditions
♦ Engine tests run position for routine test of engines.
♦ Status signals for remote indications.

Synchronization panels are mainly designed and used to meet power system requirements. These panels function both manually and with an automatic synchronizing function for one or more generators or breakers.

They are widely used in synchronizing generators and offering multiplex solutions.

Our high quality range of DG synchronizing panels is available with capacities that reaches 6000 A, and are fabricated by our engineers using premium quality electrical components including copper bus bar, insulations, wires/cable, PVC channels, meters and switches.

These panels can also be incorporated in the main LT Panels or in Sub Main Panels.